Comportamento físico-químico sob diferentes temperaturas de secagem de compósitos de fécula de mandioca e fibra de sisal

Autores

  • Larissa Moreira Barbosa UNIVERSIDADE FEDERAL RURAL DO SEMI-ÁRIDO
  • Ricardo Leite
  • Edna Maria Mendes Aroucha
  • Francisco Klebson Gomes dos Santos

DOI:

https://doi.org/10.30969/acsa.v16i2.1229

Palavras-chave:

biocompósito. fibra. propriedades. mecânica

Resumo

Nos últimos anos, aumentou o interesse pelo uso de biodegradáveis devido ao grande uso de materiais poliméricos sintéticos que acarretam diversos problemas para o ambiente e para sociedade. Com isso, o uso de fibras naturais em materiais compósitos poliméricos tem aumentado significativamente. Neste trabalho foram investigadas as propriedades físico-químicas de compósitos com a matriz de fécula de mandioca e fibra de sisal. O objetivo foi avaliar a qualidade e o desempenho mecânico do biocompósito em diferentes temperaturas de secagem, visando obter o material de maneira mais rápida e econômica. Foram realizados ensaios mecânicos para obtenção das propriedades como: limite de resistência à tração (LRT), alongamento (Along.); e módulo de elasticidade (ME) e estudos por microscopia eletrônica de varredura (MEV) no rompimento da fibra com a finalidade de verificar a iteração da matriz polimérica com a fibra nos diferentes casos. Realizou-se ainda, o teste estatístico da ANOVA para verificação da significância dos valores. Os biocompósitos apresentaram propriedades mecânicas distintas, à medida que aumenta a temperatura ocorre uma redução dos valores de propriedades, onde essa mudança é acentuada na variação de 50°C para 70°C. Realizando o teste da ANOVA foi verificado que os valores obtidos são significativos, pois todos os valores de p<0,05.

Referências

BASSYOUNI, M.. Dynamic mechanical properties and characterization of chemically treated sisal fiber-reinforced polypropylene biocomposites. Journal of Reinforced Plastics and Composites, 073168441879804. 2018.

GHOSH, T., BHASNEY, S. M., & KATIYAR, V.. Blown films fabrication of poly lactic acid based biocomposites: Thermomechanical and migration studies. Materials Today Communications, 100737. 2019.

GOMES, A. V. R., LEITE, R. H. L., SILVA JÚNIOR, M. Q., SANTOS, F. K. G., AROUCHA, E. M. M.. Influence of Composition on Mechanical Properties of Cassava Starch, Sisal Fiber and Carnauba Wax Biocomposites. Materials Research, São Carlos , v. 22, supl. 1, e20180887, 2019

IDICULA, M., JOSEPH, K., & THOMAS, S. Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester Composites. Journal of Reinforced Plastics and Composites, 29(1), 12–29. 2009.

LIANG S, NOURI H, LAFRANCHE E. Thermo-compression forming of flax fibre-reinforced polyamide 6 composites: influence of the fibre thermal degradation on mechanical properties. J Mater Sci.50,7660–72.2015.

LIU, X. X., YU, L., XIE, F. W., LI, M., CHEN, L., & LI, X. X.. Kinetics and mechanism of thermal decomposition of cornstarches with different amylose/amylopectin ratios. Starch-Starke, 62(3–4), 139–146. 2010.

LU, X., WANG, Y., LI, Y., & HUANG, Q.. Assembly of Pickering emulsions using milled starch particles with different amylose/amylopectin ratios. Food Hydrocolloids, 84, 47–57. 2018.

MALI, S., GROSSMANN, M. V. E., GARCÍA, M. A., MARTINO, M. N., & ZARITZKY, N. E.. Mechanical and thermal properties of yam starch films. Food Hydrocolloids, 19(1), 157–164. 2005.

MOORE, C. J.. Synthetic polymers in the marine environment: A rapidly increasing, long-term threat. Environmental Research, 108(2), 131–139. 2008.

NUTHONG, W., UAWONGSUWAN, P., PIVSA-ART, W., & HAMADA, H. Impact Property of Flexible Epoxy Treated Natural Fiber Reinforced PLA Composites. Energy Procedia, 34, 839–847. 2013.

OLIVEIRA, V. R. L., SANTOS, F. K. G., LEITE, R. H. L., AROUCHA, E. M. M., & SILVA, K. N. O.. Use of biopolymeric coating hydrophobized with beeswax in post-harvest conservation of guavas. Food Chemistry, 259, 55–64. 2018.

RAMÍREZ, M. G. L.; KESTUR, S. G.; GONZÁLEZ, R. M.; IWAKIRI, S.; MUNIZ, G. B.; SAHAGUN, T. S. F. Bio-composites of cassava starch-green coconut fiber: Part II - Structure and properties. Carbohydrate Polymers, [s. l.], v. 102, p. 576–583, 2014.

SUDERMAN, N., ISA, M. I. N., & SARBON, N. M. The effect of plasticizers on the functional properties of biodegradable gelatin-based film: A review. Food Bioscience, 24, 111–119, 2018.

SYAFRI, E., SUDIRMAN, MASHADI, YULIANTI, E., DESWITA, ASROFI, M., FUDHOLI, A.. Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites. Journal of Materials Research and Technology.2019.

VAN DE VELDE, K., & KIEKENS, P.. Effect of Flax/PP Panel Process Parameters on Resulting Composite Properties. Journal of Thermoplastic Composite Materials, 16(5), 413–431.2003.

VASILYEV, G., VILENSKY, R., & ZUSSMAN, E.. The Ternary System Amylose-Amylopectin-Formic Acid as Precursor for Electrospun Fibers with Tunable Mechanical Properties. Carbohydrate Polymers. 2019.

VON MOOS, N., BURKHARDT-HOLM, P., KOHLER, A. Uptake and effects of microplastics on cells and tissue of the blue mussel Mytilus edulis L. after an experimental exposure. Environ. Sci. Technol. 46 (20), 11327-11335. 2012.

XU, S., MA, J., JI, R., PAN, K., MIAO, A.J. Microplastics in aquatic environments: occurrence, accumulation, and biological effects. Science of the Total Environment. 2019.

YU, P., LIU, Z., WU, D., CHEN, M., LV, W., & ZHAO, Y.. Accumulation of polystyrene microplastics in juvenile Eriocheir sinensis and oxidative stress effects in the liver. Aquatic Toxicology, 200, 28–36. 2018.

ZARFL, C., FLEET, D., FRIES, E., GALGANI, F., GERDTS, G., HANKE, G., & MATTHIES, M. .Microplastics in oceans. Marine Pollution Bulletin, 62(8), 1589–1591.2011.

Downloads

Publicado

2020-10-16

Edição

Seção

Original Articles / Artigos de Pesquisa